Drawing of a ball screw in Taichung: 1. Start by drawing a horizontal line to represent the base of the ball screw. 2. Draw two vertical lines on each end of the horizontal line to form the supports for the ball screw. 3. Draw a long, thin cylinder in the center of the horizontal line to represent the screw shaft. 4. Draw two circles on each end of the cylinder to represent the bearings that support the screw shaft. 5. Draw a series of small circles along the length of the screw shaft to represent the ball bearings. 6. Connect the ball bearings with lines to represent the grooves in the screw shaft that they travel in. 7. Finally, add any necessary labels or dimensions to complete the drawing., 因此，直线导轨和滚珠丝杠虽然都是机械传动部件，但在结构和应用方面有较大差异，需要根据实际需求进行选择和应用, 4. 选择合适的滚珠丝杠：根据计算出的负载参考值，选择适合的滚珠丝杠型号和规格, 7. 螺母：用于固定负载和滑动在滚珠丝杠上, 3. 导程偏差：滚珠丝杠磨损后，导轨表面的形状会发生变化，导致滚珠的运动轨迹发生偏差，导致导程偏差,KSK滚珠丝杠的滚珠与丝杠的接触点是点接触，因此摩擦阻力小，能有效减少能量损耗，提高机械效率, 需要根据具体的应用需求选择合适的规格，以确保升降滚珠丝杠的可靠性和稳定性,一般来说，滚珠丝杠的工作噪音值在60-80分贝之间，具体值取决于实际情况, 2. 避免受热：滚珠丝杠轴承应避免长时间暴露在高温环境中，避免因高温导致轴承失效, 4. 滚珠直径：滚珠丝杠的滚珠直径是指滚珠的直径，通常以毫米为单位